You are hereComponent products / Power Converter, Regulation, and Conditioning Boards

Power Converter, Regulation, and Conditioning Boards

Last changed February 23, 2010 - 11:19am

During our many years of oil field related work, we have refined several power products to clean up oil field power for use by our controller products. The following are a few of our current products.

12 VDC to 24 VDC Converters

Automation and Electronics, Inc. 12 to 24 VDC Converter (DC24.5)12 to 24 VDC DC24.5 Converter

DC/DC
The DC/DC board provides 12 to 24 VDC conversion with a maximum output of 208 mA.

DC24.5
The DC24.5 board provides 12 to 24 VDC conversion with a maximum output of 500 mA.

DC50
The DC50 board provides 12 to 24 VDC conversion with a maximum output of 2.0 A.

115 VAC to 12 and 24 VDC Converters

Automation and Electronics, Inc. Remote Power Module (RPM)Remote Power Module

RPM
The RPM Remote Power Module converts 115 VAC to 12 and 24 VDC with battery charging current protection.

Voltage Regulators

Automation and Electronics, Inc. Power Regulation Module (VRM2)Power Regulation Module

VRM
The VRM Voltage Regulator Module regulates 9 to 28 VDC to 2.8 to 26.5 VDC with a maximum 2.4 A output. The output voltage is limited to a maximum of 1.5 VDC less than the input voltage.


Power and Battery Voltage Monitors

Automation and Electronics, Inc. Power Supply Monitor (PSM)Power Supply Monitor

PSM
The PSM monitors incoming AC line voltage and battery backup voltages and issues signals for AC failure, low battery, load shed, and restores for shed and low battery.

Power Distribution Boards

Automation and Electronics, Inc. RTU Power Distribution Board (RPDB)RTU Power Distribution Board

RPDB
The RPDB RTU Power Distribution Board provides power conditioning, voltage test, and switches for our WAG controllers.


Tags

Navigation