Power conversion products

The VRM2-2.4 Voltage Regulator Module is an adjustable step-down switching voltage regulator designed to provide a regulated DC Voltage for electronic loads up to 2.4 amps.

The VRM2-2.4 module has an input range from 9-28 VDC, and can output voltages from 2.8 VDC to 26.5 VDC. The module is a regulator and not a DC/DC converter. The output voltage can be adjusted to a maximum of 1.5 VDC less than the input voltage.

Typical applications are for dropping from 24 VDC to 12 VDC.

The RPM is a single board, track mounted power supply designed to convert 115 VAC to 12 VDC @ 1.5 A; 13.8 VDC current limited @.5 A for battery charging and 24 VDC @ 200 mA.

The RPM is designed to battery back the 12 VDC and 24 VDC for applications such as remote telemetry or process control instruments.

115 VAC is transformed to 18 VDC which is then regulated to 12 VDC. A high efficiency DC/DC converter is used to boost output to 24 VDC.

The RTU Power Distribution Board (RPDB) provides power protection, battery test, shutdown and switches for controlling operating mode and power.

The PSM Power Supply Monitor module is designed to provide four signals from an incoming AC power line and a 24 VDC or 12 VDC backup battery power supply.

Provides 24 VDC from 12 VDC input.

The Automation and Electronics, Inc. DC50 12 VDC to 24 VDC Converter with 2.0 A output provides 24 VDC from 12 VDC input.

The Automation and Electronics, Inc. 12 VDC to 24 VDC converter with 0.5 Amp output provides 24 VDC from 12 VDC input.

During our many years of oil field related work, we have refined several power products to clean up oil field power for use by our controller products. The following are a few of our current products.