The 608C Facility Controller is designed for applications such as Oil Production Facility Monitoring and Control.
The RTU uses the time tested 608C Embedded Controller as a communication and application program processor. The 608C communicates with Automation and Electronics, Inc. family of Smart Networked I/O Modules to access all end devices. In addition, the user can access and configure the unit via a low cost Local Operator Interface. Data is transmitted bidirectionally to a remote Host Computer with Automation and Electronics, Inc's AutoCom Protocol.
Features
General
Low Cost and High Density RS-485 Networked I/O Modules
Direct Turbine Meter Inputs
Microsoft® CE based Operator Interface
Low Speed Accumulator Inputs
PID Control Modules
AGA-3 Meter Gas Flow Calculations
Compatible with OPC Data Access 2.0 families of Host SCADA software from Case Services Cs and SAMS.
SAMS Host SCADA Software compatible
Applications
Tank Battery Monitoring
Compressor Station Monitoring and Control
Oil Production Facility Monitoring and Control
Automatic Well Test
Second Source RTU for existing Facility RTUs.
Specifications
Mechanical
Enclosure Size:
18" x 16" x 8" for Single Well Facility to 72" x 60" x 12" for 40 to 80 Well Unit. Enclosures are NEMA 4 Rated
The following is a list of available SMART I/O MODULES that are used in conjunction with the 608C Controller to make up a 608C Networked Facility RTU.
SDAM 8 Channel Analog Input Module
PDAM 8 Channel Analog Input Expansion Module
SDIM 8 Channel Low Speed Accumulator Module
STRB 4 Channel Turbine Meter Accumulator Module
SDAO 2 Channel Analog Output Module
SDIO 48 Digital Input / 48 Digital Output Module
The SDIO is interfaced to Field Wiring with Automation & Electronics, Inc. DIF-8 and DIF-16 Digital Input Modules, and PRO-4 and PRO-8 Relay Output Modules.
Each of these smart modules interface to the main 608C control processor via RS-485 serial communications using the MODBUS RTU Protocol.
A 608C Facility RTU can handle up to 48 Gas Meter Runs and additional Turbine Meter Inputs, actuate Relay Outputs, et cetera. Automation & Electronics, Inc. has supplied many Facility RTU applications over the years. Applications included replacements for existing Hydril Facility RTUs and HP Facility RTUs. Our Facility RTUs are cost effective solutions compared to PLCs.
